POM-C (Acetal)

The Copolymer grade is the ideal combination of strength, stiffness and wears resistance. It absorbs very little moisture, is easily machinable and is genuinely porosity-free making it the preferred grade for food contact and medical applications. The product exhibits an elevated resistance to hydrolysis, strong alkalis and thermal-oxidative degradation when compared to acetal homopolymer To learn more about our POM-C Material Grade use our custom request function or email websales@vivanylons.com.

Custom Request

Material Data

Density:
1.410 g/cm³
Tensile Strength:
70 MPa
Compressive Strength:
110 MPa
Impact Strength:
7.20 KJ/mm²
Friction Coefficient:
0.25
Max Cont. Temp:
90 ℃
Melting Point:
170 ℃
Water Absorption:
0.90 %
FDA Compatible:

N.B. Material data may vary slightly depending on profile and size.

Download the technical datasheet for full material data

Material Downloads

Learn more and download all technical information below.

Other Materials

PA6/12
PA6/12
Our Nylon 6 & Nylon 6 co-polymer,  offering excellent dimensional stability and reduced moisture absorption
Polyurethane (PU)
Polyurethane (PU)
Polyurethane (PU) is an extremely versatile and abrasion-resistant material. Available from Viva in a wide variety of shore hardnesses including 35-95 Shore A & 55-77 Shore D.
Polyethylene (PE-UHMW)
Polyethylene (PE-UHMW)
Polyethylene is well known in the polymer family and is often referred to as PE. It has an extremely low coefficient of friction, good chemical and corrosion resistance with excellent impact strength making it an extremely adaptive thermoplastic material.
Heat Stabilised (HS)
Heat Stabilised (HS)
Heat Stabilised PA6 Cast Nylon
Polypropylene (PP)
Polypropylene (PP)
Polypropylene (PP) features excellent chemical and acid resistance properties in addition to high impact strength.
Nylacast Impact
Nylacast Impact
Impact - specifically designed for applications that require high impact resistance and noise reduction capabilities. It works effectively in applications where there is high stress. It also has good mechanical, thermal and chemical resistance properties.