PA6/12

A copolymer of Nylon 6 and Nylon 12, produced via the anionic polymerization process using the monomer’s Caprolactam and Laurinlactam. It has reduced water absorption and improved stability and impact strength.

Custom Request

Material Data

Density:
1.14 g/cm³
Tensile Strength:
75 MPa
Compressive Strength:
115 MPa
Impact Strength:
6.5 KJ/mm²
Friction Coefficient:
0.030
Max Cont. Temp:
100 ℃
Melting Point:
215 ℃
Water Absorption:
5.0 %
FDA Compatible:

N.B. Material data may vary slightly depending on profile and size.

Download the technical datasheet for full material data

Material Downloads

Learn more and download all technical information below.

Other Materials

Wax Filled Nylon (WFN)
Wax Filled Nylon (WFN)
Wax Filled Nylon | PA 6C + wax
Polypropylene (PP)
Polypropylene (PP)
Polypropylene (PP) features excellent chemical and acid resistance properties in addition to high impact strength.
Nylacast Impact
Nylacast Impact
Impact - specifically designed for applications that require high impact resistance and noise reduction capabilities. It works effectively in applications where there is high stress. It also has good mechanical, thermal and chemical resistance properties.
Nylacast Oilon
Nylacast Oilon
The leading Oil Filled Nylon for over 40 years.
PA6 Moly
PA6 Moly
PA6 with additional molybdenum disulphide.
Polyethylene (PE-UHMW)
Polyethylene (PE-UHMW)
Polyethylene is well known in the polymer family and is often referred to as PE. It has an extremely low coefficient of friction, good chemical and corrosion resistance with excellent impact strength making it an extremely adaptive thermoplastic material.