Oil Filled Nylon (OFN)

A complex blended oil lubrication system, uniformly distributed throughout the product guarantees constant performance over the whole service life of this exceptional oil loaded nylon. Excellent sliding frictional properties, abrasion resistance and stick/slip performance make this product the first choice for unlubricated moving parts.

Custom Request

Material Data

Density:
1.14 g/cm³
Tensile Strength:
80 MPa
Compressive Strength:
95 MPa
Impact Strength:
5.4 KJ/mm²
Friction Coefficient:
0.15
Max Cont. Temp:
105 ℃
Melting Point:
220 ℃
Water Absorption:
5 %
FDA Compatible:

N.B. Material data may vary slightly depending on profile and size.

Download the technical datasheet for full material data

Oil Lubrication System

Oil-based lubricant is uniformly distributed throughout the product to guarantee constant whole life performance.

Excellent Sliding Properties

The Oil-based lubricant with OFN provides excellent sliding properties, making OFN a material of choice for applications that experience high wear as a result of friction.

High Melting Point

Increased thermal properties provide a higher melting point and continuous operating temperature compared to standard PA6.

Material Downloads

Learn more and download all technical information below.

Other Materials

PTFE
PTFE
Polytetrafluoroethylene, commonly known as PTFE is a synthetic fluoropolymer of tetrafluoroethylene. An incredibly versatile material grade, PTFE features non-wetting and non-stick surface properties, high-density formulation and high-temperature resistance, making PTFE a truly versatile material with a wide variety of applications.
Nylacast Impact
Nylacast Impact
Impact - specifically designed for applications that require high impact resistance and noise reduction capabilities. It works effectively in applications where there is high stress. It also has good mechanical, thermal and chemical resistance properties.
PA6 Glass Filled
PA6 Glass Filled
For applications requiring higher compressive strength, our Glass Filled material incorporates hollow glass ovules for outstanding abrasion and temperature resistant material at high loads.PA6 GF is available in Plate & Rod profiles only.
PA6/12
PA6/12
Our Nylon 6 & Nylon 6 co-polymer,  offering excellent dimensional stability and reduced moisture absorption
Polyethylene (PE-UHMW)
Polyethylene (PE-UHMW)
Polyethylene is well known in the polymer family and is often referred to as PE. It has an extremely low coefficient of friction, good chemical and corrosion resistance with excellent impact strength making it an extremely adaptive thermoplastic material.
Wax Filled Nylon (WFN)
Wax Filled Nylon (WFN)
Wax Filled Nylon | PA 6C + wax