Oil Filled Nylon (OFN)

A complex blended oil lubrication system, uniformly distributed throughout the product guarantees constant performance over the whole service life of this exceptional oil loaded nylon. Excellent sliding frictional properties, abrasion resistance and stick/slip performance make this product the first choice for unlubricated moving parts.

Custom Request

Material Data

Density:
1.14 g/cm³
Tensile Strength:
80 MPa
Compressive Strength:
95 MPa
Impact Strength:
5.4 KJ/mm²
Friction Coefficient:
0.15
Max Cont. Temp:
105 ℃
Melting Point:
220 ℃
Water Absorption:
5 %
FDA Compatible:

N.B. Material data may vary slightly depending on profile and size.

Download the technical datasheet for full material data

Oil Lubrication System

Oil-based lubricant is uniformly distributed throughout the product to guarantee constant whole life performance.

Excellent Sliding Properties

The Oil-based lubricant with OFN provides excellent sliding properties, making OFN a material of choice for applications that experience high wear as a result of friction.

High Melting Point

Increased thermal properties provide a higher melting point and continuous operating temperature compared to standard PA6.

Material Downloads

Learn more and download all technical information below.

Other Materials

PA6 Flame Retardant (FR)
PA6 Flame Retardant (FR)
Our PA6 FR grade is phosphorus and halogen-free, featuring an excellent LOI (Limiting Oxygen Index) assisting to prevent or inhibit the outbreak of fire.
PTFE
PTFE
Polytetrafluoroethylene, commonly known as PTFE is a synthetic fluoropolymer of tetrafluoroethylene. An incredibly versatile material grade, PTFE features non-wetting and non-stick surface properties, high-density formulation and high-temperature resistance, making PTFE a truly versatile material with a wide variety of applications.
PA6
PA6
The original cast nylon - PA6 is the base grade from which all cast nylon materials are created.
Nylastat
Nylastat
A conductive Nylacast special grade material, suitable for use in certified ATEX zones and more general anti-static applications.Available in Plate & Rod profiles only.
PA6/12
PA6/12
Our Nylon 6 & Nylon 6 co-polymer,  offering excellent dimensional stability and reduced moisture absorption
POM-C (Acetal)
POM-C (Acetal)
POM-C otherwise known as Acetal Copolymer features highly crystalline resins, making this material strong and rigid, with a low coefficient of friction in comparison to metals and other plastics. POM-C is also creep resistant and is recommended for applications where dimensional stability is important.