Nylacast Aquanyl

Aquanyl 612 is the ideal material choice for when additional resilience is a specific requirement, for example in the ball valve industry where the application of valve seat seals benefits greatly from this material. In addition due to its copolymer make up with nylon 12 the product has a reduced moisture uptake than cast nylon providing improved dimensional stability

Custom Request

Material Data

Density:
1.14 g/cm³
Tensile Strength:
74-78 MPa
Compressive Strength:
95-120 MPa
Impact Strength:
6.0-7.0 KJ/mm²
Friction Coefficient:
0.188
Max Cont. Temp:
100 ℃
Melting Point:
216 ℃
Water Absorption:
5 %
FDA Compatible:

N.B. Material data may vary slightly depending on profile and size.

Download the technical datasheet for full material data

Material Downloads

Learn more and download all technical information below.

Other Materials

Polyurethane (PU)
Polyurethane (PU)
Polyurethane (PU) is an extremely versatile and abrasion-resistant material. Available from Viva in a wide variety of shore hardnesses including 35-95 Shore A & 55-77 Shore D.
POM-C (Acetal)
POM-C (Acetal)
POM-C otherwise known as Acetal Copolymer features highly crystalline resins, making this material strong and rigid, with a low coefficient of friction in comparison to metals and other plastics. POM-C is also creep resistant and is recommended for applications where dimensional stability is important.
Nylacast Impact
Nylacast Impact
Impact - specifically designed for applications that require high impact resistance and noise reduction capabilities. It works effectively in applications where there is high stress. It also has good mechanical, thermal and chemical resistance properties.
Nylacast Oilon
Nylacast Oilon
The leading Oil Filled Nylon for over 40 years.
Polypropylene (PP)
Polypropylene (PP)
Polypropylene (PP) features excellent chemical and acid resistance properties in addition to high impact strength.
PA6
PA6
The original cast nylon - PA6 is the base grade from which all cast nylon materials are created.