Nylacast Aquanyl

Aquanyl 612 is the ideal material choice for when additional resilience is a specific requirement, for example in the ball valve industry where the application of valve seat seals benefits greatly from this material. In addition due to its copolymer make up with nylon 12 the product has a reduced moisture uptake than cast nylon providing improved dimensional stability

Custom Request

Material Data

Density:
1.14 g/cm³
Tensile Strength:
74-78 MPa
Compressive Strength:
95-120 MPa
Impact Strength:
6.0-7.0 KJ/mm²
Friction Coefficient:
0.188
Max Cont. Temp:
100 ℃
Melting Point:
216 ℃
Water Absorption:
5 %
FDA Compatible:

N.B. Material data may vary slightly depending on profile and size.

Download the technical datasheet for full material data

Material Downloads

Learn more and download all technical information below.

Other Materials

Nylastat
Nylastat
A conductive Nylacast special grade material, suitable for use in certified ATEX zones and more general anti-static applications.Available in Plate & Rod profiles only.
PA6/12
PA6/12
Our Nylon 6 & Nylon 6 co-polymer,  offering excellent dimensional stability and reduced moisture absorption
PA6 Food Grade
PA6 Food Grade
Our PA6 Food Grade material is compliant in FDA applications such as food and pharmaceutical applications, whilst retaining all the material characteristics of our standard WFN product.Available in Plate, Rod & Tube profiles.
Polyethylene (PE-UHMW)
Polyethylene (PE-UHMW)
Polyethylene is well known in the polymer family and is often referred to as PE. It has an extremely low coefficient of friction, good chemical and corrosion resistance with excellent impact strength making it an extremely adaptive thermoplastic material.
PA6
PA6
The original cast nylon - PA6 is the base grade from which all cast nylon materials are created.
Wax Filled Nylon (WFN)
Wax Filled Nylon (WFN)
Wax Filled Nylon | PA 6C + wax