PA6 Moly

PA6 Moly contains improved crystallisation and a degree of self-lubrication through the addition of molybdenum disulphide. Hardness increases and simultaneously the general mechanical and anti-friction properties are improved.

Custom Request

Material Data

Density:
1.15 g/cm³
Tensile Strength:
85 MPa
Compressive Strength:
105 MPa
Impact Strength:
4.5 KJ/mm²
Friction Coefficient:
0.25
Max Cont. Temp:
105 ℃
Melting Point:
220 ℃
Water Absorption:
6 %
FDA Compatible:

N.B. Material data may vary slightly depending on profile and size.

Download the technical datasheet for full material data

Improved Cystallisation

Molybdenum Disulphide is added resulting in improved crystallisation. This process increases the superficial hardness of the material, improving its anti-friction & dimensional stability properties.

Suitable for High Operating Temperatures

The crystal structure of PA6 Moly breaks down immediately before the melting temperature is reached, the thermal properties of the Moly are improved over standard PA6 grade. To learn more view the product technical information.

Excellent Machining Properties

The increased superficial hardness provides Moly with excellent machinability and general mechanical properties.

Material Downloads

Learn more and download all technical information below.

Other Materials

Oil Filled Nylon (OFN)
Oil Filled Nylon (OFN)
Oil Filled Nylon | PA 6C + blended liquid lubricant
POM-C (Acetal)
POM-C (Acetal)
POM-C otherwise known as Acetal Copolymer features highly crystalline resins, making this material strong and rigid, with a low coefficient of friction in comparison to metals and other plastics. POM-C is also creep resistant and is recommended for applications where dimensional stability is important.
PA6 Food Grade
PA6 Food Grade
Our PA6 Food Grade material is compliant in FDA applications such as food and pharmaceutical applications, whilst retaining all the material characteristics of our standard WFN product.Available in Plate, Rod & Tube profiles.
Nylacast Impact
Nylacast Impact
Impact - specifically designed for applications that require high impact resistance and noise reduction capabilities. It works effectively in applications where there is high stress. It also has good mechanical, thermal and chemical resistance properties.
PEEK
PEEK
Polyetheretherketone, commonly known as PEEK is a high-performance engineering plastic, featuring excellent mechanical strength, dimensional stability and high operating temperatures.
PA6 Moly
PA6 Moly
PA6 with additional molybdenum disulphide.